Job Details

A Welder is a skilled craftsman whose primary responsibility is to fuse various metal alloys utilizing industry standard welding processes. These processes include, but are not limited to manual, semi-automatic or mechanized Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), Shielded Metal Arc Welding (SMAW) or Submerged Arc Welding (SAW).

Responsibilities:

• Weld various materials as described such as carbon steel, low alloy carbon steel, stainless steel,)
• Read, understand and execute written instructions (Production orders)
• Read, understand and work to engineering drawings;
• Read, understand and work to Welding Procedure Specifications;
• Understand and implement the proper control settings for industry standard welding power supplies and power supply controllers;
• Condition, grind welds on production parts
• Use a tape measure to accurately measure part dimensions;
• Use steel squares to align and fit connectors or fittings to pipe;
• Use an electronic protractor or digital level to determine part alignment for parallelism and perpendicularity;
• Flame cut metal using Oxy-fuel torch and mechanized beveling equipment;
• Use a right angle pneumatic or electric grinder to prepare a weld bevel for arc welding;
• Use a carbon arc gouge to back-gouge;
• Use temperature indicating crayons and contact pyrometer to determine part temperature;
• Operate overhead bridge cranes and jib cranes to safely move parts
• Correctly set up and trouble shoot GMAW/FCAW semi-automatic wire feeder;
• Correctly set up and trouble shoot GTAW welding lead;
• Operate a forklift to safely move palletized and loose parts;
• Perform manual and electronic weld data logging
• Weld various exotic metals including titanium
• Ability to problem solve and assist with welding issues
• Contribute to weld qualification programs

Required Skills & Experience:

• Required: High school graduate or GED.
• Required: 2 years of experience welding and is proficient in welding carbon and stainless-steel pipe, fittings and plate. This classification of welder is not limited by welding position and can make 100% x-ray quality welds using GMAW, FCAW, SMAW and GTAW in all positions (including GMAW and GTAW open root pipe welds) as well as SAW in the flat position.
• Required (Welder II): 2-10 years with fatigue sensitive welding
• Fluent in English both reading and writing
• Able to perform tasks with limited supervision; able understand what they have been instructed to do
• Good communication skills; capable of instructing and training other welders or welding operators
• Training on safety, welding procedures, drawings, shop routers or work instructions as needed
• Must be able to handle multiple tasks and work flexible hours
• Must be dependable and trustworthy

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is frequently required to stand, use hands to touch, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is occasionally required to walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus.
• This position requires an onsite presence to perform the essential duties.

Work Environment/Conditions:

• This position will require working primarily indoors in a manufacturing facility but may also require the employee to be outdoors on occasion. Indoor locations are partially climate controlled.
• Occasional assignments will require evening or weekend schedules.
• The noise level is usually moderate. Employee will occasionally work near moving mechanical parts.
• This work is performed primarily from the standing position but may require the welder to bend at the waist and or knees, lie on his back or side or work from the sitting position while looking up or down. Workstations may be located on production pieces such as skids or inside vessels

Candidates are required to be authorized to work in the United States. All employees must be able to comply with the company Drug and Alcohol Policy, which includes participation in Company random drug testing. Employment is subject to background checks appropriate to the position.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.